.svg)
JONA® EPO METALLIC
Surface material:
Concrete
Typical applications:
Used in many fields from industrial floors with light loads and floor types that require long-term protection against chemicals and abrasives such as warehouses, laboratories, factories, industrial plants, diseases institute.
Introduction:
JONA® EPO METALLIC is a coating for solvent-free concrete floor, Epoxy resin base consists of 2 components, self-spreading, for a seamless finish surface, capable of executing at high thickness.R: G: B:
Outstanding feature
Description
Used in many fields from industrial floors with light loads and floor types that require long-term protection against chemicals and abrasives such as warehouses, laboratories, factories, industrial plants, diseases institute.
Features
Keep lid on, avoid to contact with air. Store in dry and cool place.
 |
- Non-volatile content: min.90% - Density: 1.10 ± 0.05 g/ml - VOC content: Max 300 g/liter - Mixing ratio by volume A/B: 2.5/1 (Apply as soon as mixing) |
 |
- Wet paint thickness: 1-3mm - Dry paint thickness: 1-3mm |
 |
- Drying time (23°C): Surface dry aster 4h, hard dry after 24h - Cover next layer after (23°C): minimum 16h - Life time (23°C): 30p (decrease at higher temperature) |
On the standard surface.
  |
1 COVER Finishing with 1 layer of JONA® EPO METALLIC. Theoretical coverage 0.8 - 1.1 m2/kg/layer 1 mm. |
** Real coverage can change depends on color and surface condition.
** Apply on the floor covered by primer layer.
how to apply
Color selection method
Choose color from Joton website www.joton.com.vn / Choose color from product color chart
More
 |
LOW VOCJOTON products do not include carcinogens, substance cause mutant and toxic substance. All substance cause pollution have content under 0.01% gravity. |
Note
| Surface temperature for applying 10 ºC - 45 ºC. Environment temperature 10 C- 32 ºC, higher temperature activate solidifying, applying time decrease quite much. |
| Pour mixture as soon as mixing in order to lengthen applying time. |
|
If applying paint surface from 1.5 mm and over, reach the designate thickness, use barbate roll and roll continuously on paint surface to make gas leaks out of paint surface, roll until painting surface looks like a mirror. |
Health and safety
- Keep away from children- Ensure good ventilation condition during apply and dry time.
- Avoid to inhale paint powder.
- Should use protective glass when apply. When paint gets into eyes, wash with water and visit medical facilities immediately.
- Use suitable solvent to clean paint on body, then use water and soap to clean completely.
- Be careful during transport. Sprinkle soil or sand on to collect if paint poured out
- Pay attention to prevent explosion. Do not pour out paint to sewer and fountain.
