JOTON | Sự khác biệt đến bất ngờ !

Industrial

other products

JONA® BITUM

JONA® BITUM is the single component bituminous coating with physically dried property. It is used for coating the metal and concrete surfaces, which are not directly radiated by the sunlight in order to waterproof and stand high humidity well.

Surface material: Concrete, metal.

Features High adhesion, tough paint film. Water resistance, seawater and mildew.

JONA® CHLORUB

JONA® CHLORRUB is the single component chlorinated rubber coating. It is used for coating exterior metal, concrete and wood surfaces in vessel, container, construction, mechanical equipment, traffic, etc. JONES® CHLORUB has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5639:2002.

Surface material: Wood, concrete, metal, ...

Features High adhesion on concrete and metal substrates. Quick dry. Resistant to abrasion, impact, chemicals, weather, marine environment, industrial environment, wet.

JONA® EPO (A)

JONA® EPO is the two-component solvent based epoxy finish. It is used for the steel surfaces of tanks, holds which have the demand of food safety or of an epoxy coating system. It is used for concrete floor surfaces of house, laboratory, workshop, places which are frequently walked on. JONA® EPO has been certified as conforming to the Japanese Industrial Standard JIS K 5659:2008.

Surface material: The practiced surface should be clean, dry and free oil, grease and chalking.

Features JONA® EPO is a two-component epoxy paint, solvent system. On steel substrates: protect metal surfaces, tanks that require food safety requirements, and require complete epoxy system coating.

JONA® INT (A)

JONA® INT is the two-component epoxy with large solid content and is a part of an epoxy coating system. It makes the film harder and tougher with reasonable thickness and stands the impacts well. JONA® INT has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5659:2008.

Surface material: The practiced surface should be clean, dry and free oil, grease and chalking.

Features Practice easily Standing impact and abrasion well. Add the hardness and toughness to the film. Heat-resistant up to 1100C (un-continuous).

JONA® PU (A)

JONA® PU is the two-component polyurethane finish solidified by Polyisocyanate. It is used for protecting and decorating appropriately processed surfaces which have the long-term exterior using purpose such as vessels, construction and other industries. JONA® PU has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5659:2008.

Surface material: The practiced surface should be clean, dry and free from oil and grease.

Features Good adhesion and gloss film. Durability, standing impact and abrasion well. Resistance to the influences of weather, UV and chemical. Resistance to acid and alkali, gasoline. Water-resistant. Heat-resistant up to 1000C (un-continuous).

JONA® SICO-300

JONA® SICO-300 is the heatproof paint, based on silicone resin. It is used for coating objects which have been resisted heat up to 350o C.

Surface material: The practiced surface should be clear, dry and free from oil and grease.

Features Good adhesion. Resistance to gasoline, oil, water, salt water, sea water and chemical substances. Outstanding resistance against weather. Compatible with JONES® ZINC-S. Heat-resistant up to 3500 C.

JONA® TAR (A)

JONA® TAR is the two-component epoxy finish with large solid content, curing by polyamide or polyamine Its ingredient has coal tar in order to protect the underground concrete surfaces. It is used for the underwater metal surfaces or surfaces at fluctuated water-line, interior surfaces of ballast holds, waste water cistern. JONES® TAR has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5659:2008.

Surface material: Concrete, metal

Features Good adhesion. Stand the impact and abrasion well. Resistance to fungus and alga. Good water-resistant.

JONA® WEPO (A)

JONA® WEPO is the water based two-component epoxy. It is used for finishing concrete floor surfaces of house, storage, workshop, plant, factory, laboratory, etc.

Surface material: The practiced surface should be clean and free from the contamination of dirt, oil, wax, chalking, mildew and other chemical agents in order to ensure proper adhesion to the substrate. The jet- water can be used for cleaning after that. The prior coating (if any) has to be moved by sanded or abraded. Filling the holes and cracks on the surface and/ or leveling with JOTON® WEPO. For the new concrete (in normal conditions), practicing is only allowed after 28 days.

Features Practice and clean tools easily. Durability and fast color film. Standing impact, abrasion, chemical and the influences of weather well. Safety in application because of the used water thinner.

JONES® EPO

JONES® EPO is the two-component epoxy primer solidified by Polyamide or Amine. It is compatible with most of another Chlorinated rubber, Polyurethane and Epoxy. Used to increase adhesion, alkali prevention effect for coatings on concrete and anti-rust substrates to protect metal parts for industrial plants, chemical, fuel, sea water, and biological water tanks active ... JONES® EPO has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5551:2008

Surface material: Bare steel: To get the best finish, the cleaning with abrasive blast should be conformed to SA 21/2, and the removing oil and grease with solvent should be conformed to SSPC-SP1. Shopprimed steel: Clean, dry and undamaged approved shopprimer. For the concrete surfaces, the wet cloths should be used for cleaning dirt and other same contaminants. The dilute detergent or solvent should be used for removing oil and grease. For exterior surfaces, jet-water can be used. Filling and leveling the holes and cracks on the surface with suitable materials. The rough surface will increase adhesion. The surface humidity is not more than 12%.

Features High adhesion on metal, concrete, wood, plastic surfaces. Resistant to acid, salt, gasoline, seawater, fresh water and foods.

JONES® EPO CLEAR

Surface material:

Features

JONES® ETCH

JONES® ETCH is a two-component acid primer based on polyvinyl butyral resin, used to increase the adhesion of coatings on metal surfaces, especially difficult metals such as aluminum, steel and steel. JONES® ETCH galvanized is compatible with many types of coatings: alkyd, epoxy, PU, ...

Surface material: Metal, especially aluminum, steel and galvanized steel.

Features High solid content, abrasion resistance, impact. This product is part of a complete Epoxy coating system, has a high surface hardness and is suitable for systems with a thick thick raft ... Meets JIS K 5659: 2008.

JONES® WEPO (A)

JONES® WEPO is the water based two-component epoxy primer. It is used as the primer of interior concrete surfaces for increasing adhesion of the finish.

Surface material: The practiced surface should be clean and free from the contamination of dirt, oil, grease, wax, chalking, mildew and other chemical agents in order to ensure proper adhesion to the substrate. The jet- water can be used for cleaning after that. The prior coating (if any) has to be moved by sanded or abraded. Filling and leveling the holes, cracks on the surface with JOTON® WEPO. For the new concrete (in normal conditions), practicing is only allowed on 28 days after.

Features Practice and clean tools easily. Good adhesion. Standing humidity and chemical well. Durability. Resistance to alga and fungus. Resistance to the alkalization of concrete surface. Safety in application because of the used water thinner.