JOLINE® PRIMER
JOLINE® PRIMER is a primer for JOLINE® thermoplastic road marking paint. JOLINE® PRIMER primer will extend the service life and increase adhesion to the complete JOLINE® paint
Surface material: Asphalt
Features
Primer will extend the life and increase adhesion for the complete JOLINE® paint
View more
JONA® BITUM
JONA® BITUM is the single component bituminous coating with physically dried property. It is used for coating the metal and concrete surfaces, which are not directly radiated by the sunlight in order to waterproof and stand high humidity well.
Surface material: Concrete, metal.
Features
High adhesion, tough paint film. Water resistance, seawater and mildew.
View more
JONA® CHLORUB
JONA® CHLORRUB is the single component chlorinated rubber coating. It is used for coating exterior metal, concrete and wood surfaces in vessel, container, construction, mechanical equipment, traffic, etc. JONES® CHLORUB has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5639:2002.
Surface material: Wood, concrete, metal, ...
Features
High adhesion on concrete and metal substrates. Quick dry. Resistant to abrasion, impact, chemicals, weather, marine environment, industrial environment, wet.
View more
JONA® EPO (A)
JONA® EPO is the two-component solvent based epoxy finish. It is used for the steel surfaces of tanks, holds which have the demand of food safety or of an epoxy coating system. It is used for concrete floor surfaces of house, laboratory, workshop, places which are frequently walked on. JONA® EPO has been certified as conforming to the Japanese Industrial Standard JIS K 5659:2008.
Surface material: The practiced surface should be clean, dry and free oil, grease and chalking.
Features
JONA® EPO is a two-component epoxy paint, solvent system. On steel substrates: protect metal surfaces, tanks that require food safety requirements, and require complete epoxy system coating.
View more
JONA® EPO CLEAR
JONA® EPO CLEAR is a transparent coating for solvent-free concrete floors, Epoxy resin base consists of 2 components, evenly spread out, giving a seamless finish, capable of executing at high thickness. Used in many fields from industrial floors with light loads and floor types that require long-term protection against chemicals and abrasives such as warehouses, laboratories, factories, industrial plants, diseases institute.
Surface material: Concrete
Features
Bearing, impact resistant, abrasive and very good chemicals. Can be applied at 1-3 mm thickness (depending on construction method).
View more
JONA® INT (A)
JONA® INT is the two-component epoxy with large solid content and is a part of an epoxy coating system. It makes the film harder and tougher with reasonable thickness and stands the impacts well. JONA® INT has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5659:2008.
Surface material: The practiced surface should be clean, dry and free oil, grease and chalking.
Features
Practice easily
Standing impact and abrasion well.
Add the hardness and toughness to the film.
Heat-resistant up to 1100C (un-continuous).
View more
JONA® MODIKYD PU
JONA® MODIKYD PU is the high gloss finish coating based urethane modified Alkyd resin. It is used as a multi-purpose coating for finishing surfaces in industrial and mechanic fields, and surfaces of vessel sections which are effected of sea water and sea weather.
Surface material: The practiced surface should be clear, dry and free from oil and grease.
Features
Good adhesion, hard film, durability.
Excellent resistance to sea water and sea weather.
Standing impact and abrasion well.
View more
JONA® PU (A)
JONA® PU is the two-component polyurethane finish solidified by Polyisocyanate. It is used for protecting and decorating appropriately processed surfaces which have the long-term exterior using purpose such as vessels, construction and other industries. JONA® PU has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5659:2008.
Surface material: The practiced surface should be clean, dry and free from oil and grease.
Features
Good adhesion and gloss film.
Durability, standing impact and abrasion well.
Resistance to the influences of weather, UV and chemical.
Resistance to acid and alkali, gasoline.
Water-resistant.
Heat-resistant up to 1000C (un-continuous).
View more
JONA® TAR (A)
JONA® TAR is the two-component epoxy finish with large solid content, curing by polyamide or polyamine Its ingredient has coal tar in order to protect the underground concrete surfaces. It is used for the underwater metal surfaces or surfaces at fluctuated water-line, interior surfaces of ballast holds, waste water cistern. JONES® TAR has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5659:2008.
Surface material: Concrete, metal
Features
Good adhesion.
Stand the impact and abrasion well.
Resistance to fungus and alga.
Good water-resistant.
View more
JONA® WEPO (A)
JONA® WEPO is the water based two-component epoxy. It is used for finishing concrete floor surfaces of house, storage, workshop, plant, factory, laboratory, etc.
Surface material: The practiced surface should be clean and free from the contamination of dirt, oil, wax, chalking, mildew and other chemical agents in order to ensure proper adhesion to the substrate. The jet- water can be used for cleaning after that.
The prior coating (if any) has to be moved by sanded or abraded.
Filling the holes and cracks on the surface and/ or leveling with JOTON® WEPO.
For the new concrete (in normal conditions), practicing is only allowed after 28 days.
Features
Practice and clean tools easily.
Durability and fast color film.
Standing impact, abrasion, chemical and the influences of weather well.
Safety in application because of the used water thinner.
View more
JONES® CONC (A)
JONES® CONC is the two-component epoxy primer solidified by Polyamide or Amine. It is used as the primer of coating system for floor in industrial area in order to increase adhesion, resist to alkalization of the finish on concrete surfaces.
Surface material: The practiced surface should be clean. The dilute detergent or solvent should be used to remove oil and grease. For exterior surface, jet-water can be used. Filling and leveling the holes and cracks on the surface with suitable materials. The uneven surface will increase adhesion.
The surface humidity is not more than 4%.
Features
Good adhesion on kinds of floor coating and of concrete surface.
Resistance to water, solvent and chemical.
View more