JOTON | Sự khác biệt đến bất ngờ !

Industrial

other products

JONES® ZINC-P

JONES® ZINC-P is the two-component epoxy primer with Zinc Phosphate. It is used for resisting corrosion of metal surfaces in irrigation, marine works and chemical workshop that have been demanded an epoxy coating system. JONES® ZINC - P has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5551:2008.

Surface material: Bare steel: To get the best finish, the cleaning with abrasive blast should be conformed to SA 21/2, and the removing oil and grease with solvent should be conformed to SSPC-SP1. Shopprimed steel: Clean, dry, free from oil, grease and other contaminants and undamaged approved shopprimer.

Features Good adhesion. Resistance to gasoline, oil, water, sea water. Resistant to chemical substances and the influences of weather. Heat-resistant up to 1100C (un-continuous).

JONES® ZINC-R

JONES® ZINC-R is the two-component epoxy primer with Zinc dust solidified by Polyamide. It is anti-corrosive and anti-abrasion of steel surfaces that have been demanded an epoxy coating system. JONES® ZINC-R has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5553:2010.

Features High adhesion. Durable with salt water, gasoline, sea water, fresh water, chemicals

JONES® ZINC-S

JONES® ZINC-S is the two-component Zinc Ethyl Silicate primer with property of self-solidification, anti–abrasion and standing well hard weather conditions. Its film appearance is level and matte. It protects steel surfaces such as tanks or hold of chemical, chimney, etc. which have been borne high heat. JONES® ZINC-S is also suitable for another coatings such as Epoxy, Silicone, Polyurethane, etc. JONES® ZINC-S has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5553:2010.

Surface material: Metal

Features High adhesion. Durable with salt water, gasoline, sea water, fresh water and chemicals in the range of pH 5-9.

JOTO® 6

JOTO® 6 is the Colophony and Synthesis based anti-fouling coating with Biocide and Cuprous Oxide. Its operating is on solution reaction. It is used for protecting the bilge and underwater parts of boat for anti fouling from 6 to 9 months (Depending on operating conditions of boat).

Surface material: The surface must be dry and free from fouling, salts and other contaminants. Remove salts and dirt by fresh water washing and hard fouling by scraping. For steel surface: the rust should be cleaned and the blisters of prior coating should be leveled. Corroded and/ or damaged areas should be repaired first with an appropriate primer system. For wood surface, the holes and cracks on the surface should be filled and leveled with suitable materials.

Features Good adhesion. Fast drying. Resistance to seaweed and fouling.

JOTO® LOG

JOTO®LOG is the fast drying based alkyd modified synthesis copolymer primer coating. It is used as the primer of the steel, wood surfaces, anti-fouling coating to rust-proof the surfaces of bilge.

Surface material: The practiced surface should be clear, dry and free from oil, grease and other contaminants. Bare steel: To get the best finish, the cleaning with abrasive blast should be conformed to SA 21/2, and the removing oil and grease with solvent should be conformed to SSPC-SP1. For wood surface, the holes and cracks on the surface should be filled and leveled with suitable materials.

Features High adhesion. Durable to sea water. Quick dry.

JOTON® REGAL 2K

JOTON REGAL 2K is the two-component polyurethane finish solidified by Polyisocyanate. It is produced from Acrylic resin and used for metal surfaces without primer layer, especially on metals which are hard–to-apply, such as: aluminum, galvanized steel, inox Suitable for both interior and exterior in industry, construction, transportation, and other industries. JOTON REGAL 2K has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K5659:2018.

Surface material: aluminum, galvanized steel, inox...

Features  Good adhesion and gloss film.  Durability, standing impact and abrasion well.  Resistance to the influences of weather, UV and chemical.  Resistance to acid and alkali, gasoline.  Water-resistant.  Heat-resistant up to 100oC (un-continuous).