.svg)
JOMORTAR®-CT
2 components waterproof mortar JOMORTAR®-CT is polymer waterproof material that based on cement, produced by JOTON.,JSC. It applied on mortar and concrete surface in order to resist wetting. 2 components waterproof mortar has high waterproof ability, good adhesion with compact surface, is effective block layer resist carbonation, no toxic, no corrosion, sligh resilient, easy mixing and apply.
Surface material: Concrete
Features
High waterproof ability, good adhesion with compact surface, is effective block layer resist carbonation, no toxic, no corrosion, sligh resilient, easy mixing and apply.
View more
JOMORTAR®-FS
JOMORTAR® -FS is a kind of mortar produced by JOTON., JSC, which does not contain chloride, is made available for immediate use. When mixed with water becomes a temporary barrier, freezing is very effective. Fast hardening mortar has good water blocking capacity and is able to withstand high pressure, fast setting and fast growing intensity; Good adhesion, no cracking; Does not contain chloride, does not corrode; Easy to use, easy to mix just adding water, no special equipment needed.
Surface material: Concrete, cliff, mortar, slit between concrete and steel, ...
Features
Prevent water well and withstand high pressure, fast connection and develop very fast strength; Good adhesion, no cracking; Does not contain chloride, does not corrode; Easy to use, easy to mix just need more water, no special equipment needed.
View more
JOPASTE® -CT
JOTON., JSC's elastic waterproof membrane is a one-component, modified co-polymer based waterproofing compound with high elasticity. When curing waterproofing membrane creates a continuous, flexible membrane with very high elasticity (≥ 400%), good adhesion force and sealing small cracks, absolutely preventing water penetration through the surface face material. Elastic waterproof membrane is able to withstand special weather especially for ultraviolet rays, does not pollute water sources (including domestic water) when in direct contact with the product; Non-flammable, non-toxic to construction workers.
Surface material: Concrete mortar
Features
Good adhesion and sealing small cracks, preventing absolute water penetration through the surface of the material
View more
JOTAD®-01
As a concrete admixture manufactured by JOTON., JSC, there are 2 features that are both superplasticizer to produce liquid flowing concrete and significantly reduce mixing water, increase initial and final intensity.
Surface material: Concrete
Features
Increase initial and final strength for concrete
View more
JOTAD®-02
JOTAD®-02 is an improved emulsion mixed with cement or cement-slurry to increase connectivity and waterproofing. Waterproofing additives and connection agents with excellent adhesion and waterproofing properties; increase elasticity and reduce shrinkage; Chemical resistant and non-toxic, suitable for cement mortar to contact drinking water.
Surface material: Cement
Features
Increasing adhesion and waterproofing ability
View more
JOTON® CT
JOTON® CT is an oil-based paint that has anti-permeability, alkali resistance, moss, weather resistance and good cleaning properties. JOTON® CT is used for waterproofing:
Construction surfaces such as walls, ceilings, concrete structures, basements, restrooms, etc.
Swimming pool, domestic water tank.
Surface material: Wall, ceiling, concrete, basement, toilet area, swimming pool, water reservoir, ...
Features
Waterproofing, alkali resistance, moss, weather resistance and cleaning.
View more
JOTON® CT-2010
JOTON¬® CT-2010 is the waterproof emulsion which is combinable with cement. Its film prevents permeation from the outside and allows evaporation from the inside of water. It is also used as a good adhesive to fill cracks and slits of surfaces. JOTON¬® CT-2010 is suitable for the surfaces of concrete, cement wall, cistern, terrace, bathroom, restroom, and concrete eaves … JOTON¬® CT-2010 is safe for using with no mercury, no lead and non-flammable.
Surface material: The surface should be clear and dry; free from dirt, oil and grease. Surface humidity is about 20%. The surface has to be dampened if it is so dry, waterproofing and dealing with causes of those to the roots, mixing JOTON¨ CT-2010 with cement to have a paste to fill cracks and slits of the surface before coating.
The previous coatings of painted surfaces should be cleaned thoroughly with iron brush and/ or high pressure water jet, and waterproofed (if any) before coating.
Features
Prevent water from outside but the paint still evaporates easily.
View more
JOTON® CT-J-555
JOTON¨ CT-J-555 is the high-grade waterproof emulsion coating. Its film is good elasticity, fast color and good standing in hard weather conditions. This prevents water permeation from the outside and allows evaporation from the inside of water, especially prevents walls from permeating. It can resist alkalization, alga and fungus; can fill hairline cracks and slits of the surface. It is compatible with another architecture paints and can be cleaned easily.
Surface material: The surface should be clear and dry; free from dirt, oil and grease. Surface humidity is under 15%.
For the painted surface: The previous coatings, dusty, alga and fungus should be thoroughly cleaned with iron brush and/ or high pressure water jet, and waterproofed and dealt with causes of those to the roots, mixing JOTON¨ CT11-2010 with cement to have a paste to fill cracks and slits of the surface before coating.
For new concrete surface: It necessary demands at least 28 days after to solidify completely (temperature 300 C, humidity 80%) before coating.
Features
JOTON® CT-J-555 is suitable for all masonry surfaces such as brickwork, plaster, concrete, cement, tiles, etc.
JOTON® CT-J-555 has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5663:2003 and Vietnam Building Code: Products, Goods of Building Material QCVN 16:2017/BXD
View more
JOTON® CT-J100
JOTON® CT-J100 is the high-grade waterproof emulsion coating. Its film is good elasticity. This prevents water permeation from the outside and allows evaporation from the inside of water, especially prevents walls from permeating. It can fill hairline cracks and slits of the surface. It is compatible with another architecture paints and can be cleaned easily. It does not contain lead and mercury.
JOTON® CT-J100 is suitable for all masonry surfaces such as brickwork, plaster, concrete, cement, tiles, etc.
Surface material: masonry surfaces such as brickwork, plaster, concrete, cement, tiles
Features
• Good adhesion.
• Durability, resistance to the influences of weather, UV.
• Resist to fungus and algae - Superior water resistance.
• Easy clean.
• Excellent alkali resistance.
View more
JOTON® CT-N
JOTON CT N has a durable paint film, good elasticity for a long time, the paint film suffers from good weather, alkali resistance, mold resistance, easy to clean. Absolutely compatible with the Northern Vietnam climate.
Surface material: Ho mortar, concrete, cement, brick and tile, ...
Features
Prevent water penetration from outside, especially vertical walls, concrete, cement ... Compatible with other decorative paints.
View more
JOTON® CT-X
JOTON® CT-X is a water-based waterproof paint combined with cement. This paint works to prevent water penetration from outside but the paint film still escapes moisture easily. Can be used as a binder to fill small cracks and cracks on concrete surfaces. JOTON® CT-X does not burn and does not contain lead or mercury. Safety for the user. JOTON® CT-X is suitable for concrete, foundation, cement wall ...
Surface material: Lake mortar, concrete, cement, ...
Features
Prevent water penetration from outside but the paint film is still escapes moisture easily.
View more