JOTON | Sự khác biệt đến bất ngờ !

Industrial

other products

JOTEENES®

JOTEENES® is a high quality acrylic resin paint used to finish the Tennis court, basketball court, other sports grounds, ..., with high resilience and reduced vibration when playing sports.

Surface material: Concrete

Features High adhesion. High elastic. Good shock absorber. Resistant to abrasion and impact. Avoid slippery. Water resistance, mold resistance, alkali resistance and weather resistance.

JONES® MORTAR is a buffer for solvent-free concrete floor, epoxy resin system consists of 3 components, for seamless surface finish, capable of executing in many different thicknesses depending on the purpose for each type different floor. Used for medium-sized industrial floors and floors that require long-term protection against chemicals and abrasives such as warehouses, laboratories, factories, industrial plants.

Surface material: Concrete

Features Bearing, impact resistant, abrasive and very good chemicals. Can be applied at a thickness of 2-10 mm (depending on the method of construction)

JONES® WEPO (A)

JONES® WEPO is the water based two-component epoxy primer. It is used as the primer of interior concrete surfaces for increasing adhesion of the finish.

Surface material: The practiced surface should be clean and free from the contamination of dirt, oil, grease, wax, chalking, mildew and other chemical agents in order to ensure proper adhesion to the substrate. The jet- water can be used for cleaning after that. The prior coating (if any) has to be moved by sanded or abraded. Filling and leveling the holes, cracks on the surface with JOTON® WEPO. For the new concrete (in normal conditions), practicing is only allowed on 28 days after.

Features Practice and clean tools easily. Good adhesion. Standing humidity and chemical well. Durability. Resistance to alga and fungus. Resistance to the alkalization of concrete surface. Safety in application because of the used water thinner.

JONES® SEALER (A)

JONES®SEALER is the two-component epoxy primer without solvent, solidified by Polyamide or polyamine. It is compatible with most of another Polyurethane and Epoxy. It is used as the primer of industrial floor coating system for increasing adhesion, resisting to alkalization of the finish on concrete surfaces.

Surface material: The practiced surface should be clean. The dilute detergent or solvent should be used to remove oil and grease. For exterior surface, jet-water can be used. Filling and leveling the holes and cracks on the surface with suitable materials. The rough surface will make the adhesion to be more.

Features Good adhesion on kinds of floor coating and most of concrete surfaces. Resistance to water, solvent and chemical. Good solidification in spite of dripping wet floor. Practicing directly on surface with high humidity is possible.

JONES® EPO CLEAR

Surface material:

Features

JONES® EPO

JONES® EPO is the two-component epoxy primer solidified by Polyamide or Amine. It is compatible with most of another Chlorinated rubber, Polyurethane and Epoxy. Used to increase adhesion, alkali prevention effect for coatings on concrete and anti-rust substrates to protect metal parts for industrial plants, chemical, fuel, sea water, and biological water tanks active ... JONES® EPO has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5551:2008

Surface material: Bare steel: To get the best finish, the cleaning with abrasive blast should be conformed to SA 21/2, and the removing oil and grease with solvent should be conformed to SSPC-SP1. Shopprimed steel: Clean, dry and undamaged approved shopprimer. For the concrete surfaces, the wet cloths should be used for cleaning dirt and other same contaminants. The dilute detergent or solvent should be used for removing oil and grease. For exterior surfaces, jet-water can be used. Filling and leveling the holes and cracks on the surface with suitable materials. The rough surface will increase adhesion. The surface humidity is not more than 12%.

Features High adhesion on metal, concrete, wood, plastic surfaces. Resistant to acid, salt, gasoline, seawater, fresh water and foods.

JONES® CONC (A)

JONES® CONC is the two-component epoxy primer solidified by Polyamide or Amine. It is used as the primer of coating system for floor in industrial area in order to increase adhesion, resist to alkalization of the finish on concrete surfaces.

Features Good adhesion on kinds of floor coating and of concrete surface. Resistance to water, solvent and chemical.

JONA® WEPO (A)

JONA® WEPO is the water based two-component epoxy. It is used for finishing concrete floor surfaces of house, storage, workshop, plant, factory, laboratory, etc.

Surface material: The practiced surface should be clean and free from the contamination of dirt, oil, wax, chalking, mildew and other chemical agents in order to ensure proper adhesion to the substrate. The jet- water can be used for cleaning after that. The prior coating (if any) has to be moved by sanded or abraded. Filling the holes and cracks on the surface and/ or leveling with JOTON® WEPO. For the new concrete (in normal conditions), practicing is only allowed after 28 days.

Features Practice and clean tools easily. Durability and fast color film. Standing impact, abrasion, chemical and the influences of weather well. Safety in application because of the used water thinner.

JONA® TAR (A)

JONA® TAR is the two-component epoxy finish with large solid content, curing by polyamide or polyamine Its ingredient has coal tar in order to protect the underground concrete surfaces. It is used for the underwater metal surfaces or surfaces at fluctuated water-line, interior surfaces of ballast holds, waste water cistern. JONES® TAR has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5659:2008.

Surface material: Concrete, metal

Features Good adhesion. Stand the impact and abrasion well. Resistance to fungus and alga. Good water-resistant.

JONA® PU (A)

JONA® PU is the two-component polyurethane finish solidified by Polyisocyanate. It is used for protecting and decorating appropriately processed surfaces which have the long-term exterior using purpose such as vessels, construction and other industries. JONA® PU has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5659:2008.

Surface material: The practiced surface should be clean, dry and free from oil and grease.

Features Good adhesion and gloss film. Durability, standing impact and abrasion well. Resistance to the influences of weather, UV and chemical. Resistance to acid and alkali, gasoline. Water-resistant. Heat-resistant up to 1000C (un-continuous).

JONA® MODIKYD PU

JONA® MODIKYD PU is the high gloss finish coating based urethane modified Alkyd resin. It is used as a multi-purpose coating for finishing surfaces in industrial and mechanic fields, and surfaces of vessel sections which are effected of sea water and sea weather.

Surface material: The practiced surface should be clear, dry and free from oil and grease.

Features Good adhesion, hard film, durability. Excellent resistance to sea water and sea weather. Standing impact and abrasion well.

JONA® INT (A)

JONA® INT is the two-component epoxy with large solid content and is a part of an epoxy coating system. It makes the film harder and tougher with reasonable thickness and stands the impacts well. JONA® INT has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5659:2008.

Surface material: The practiced surface should be clean, dry and free oil, grease and chalking.

Features Practice easily Standing impact and abrasion well. Add the hardness and toughness to the film. Heat-resistant up to 1100C (un-continuous).