JOTON® WEPO (A)
JOTON® WEPO is the water based two-component epoxy mastic. It is used for filling and leveling concrete surfaces before coating.
Surface material: The practiced surface should be clean and free from the contamination of dirt, oil, wax, chalking, mildew
and other chemical agents in order to ensure proper adhesion to the substrate.
The prior coating (if any) has to be moved.
Filling and leveling the holes and cracks on the surface and/ or leveling with JOTON® WEPO.
It should be filled many tomes for holes or cracks having over 1 cm3 volumes.
For the new concrete (in normal conditions), practicing is only allowed after 28 days.
Features
Ameliorating mechanical and physical properties of the surface.
Good adhesion.
Suitability for most high-class coatings. Well practicing on saturated humidity concrete substrate.
Non-toxic.
View more
JONES®MORTAR (A)
JONES® MORTAR is a buffer for solvent-free concrete floor, epoxy resin system consists of 3 components, for seamless surface finish, capable of executing in many different thicknesses depending on the purpose for each type different floor. Used for medium-sized industrial floors and floors that require long-term protection against chemicals and abrasives such as warehouses, laboratories, factories, industrial plants.
Surface material: Concrete
Features
Bearing, impact resistant, abrasive and very good chemicals. Can be applied at a thickness of 2-10 mm (depending on the method of construction)
View more
JONES® WEPO (A)
JONES® WEPO is the water based two-component epoxy primer. It is used as the primer of interior concrete surfaces for increasing adhesion of the finish.
Surface material: The practiced surface should be clean and free from the contamination of dirt, oil, grease, wax, chalking, mildew and other chemical agents in order to ensure proper adhesion to the substrate.
The jet- water can be used for cleaning after that. The prior coating (if any) has to be moved by sanded or abraded.
Filling and leveling the holes, cracks on the surface with JOTON® WEPO.
For the new concrete (in normal conditions), practicing is only allowed on 28 days after.
Features
Practice and clean tools easily. Good adhesion.
Standing humidity and chemical well.
Durability. Resistance to alga and fungus.
Resistance to the alkalization of concrete surface.
Safety in application because of the used water thinner.
View more
JONES® SEALER (A)
JONES®SEALER is the two-component epoxy primer without solvent, solidified by Polyamide or polyamine. It is compatible with most of another Polyurethane and Epoxy. It is used as the primer of industrial floor coating system for increasing adhesion, resisting to alkalization of the finish on concrete surfaces.
Surface material: The practiced surface should be clean. The dilute detergent or solvent should be used to remove oil and grease. For exterior surface, jet-water can be used.
Filling and leveling the holes and cracks on the surface with suitable materials. The rough surface will make the adhesion to be more.
Features
Good adhesion on kinds of floor coating and most of concrete surfaces.
Resistance to water, solvent and chemical.
Good solidification in spite of dripping wet floor.
Practicing directly on surface with high humidity is possible.
View more
JONES® EPO
JONES® EPO is the two-component epoxy primer solidified by Polyamide or Amine. It is compatible with most of another Chlorinated rubber, Polyurethane and Epoxy.
Used to increase adhesion, alkali prevention effect for coatings on concrete and anti-rust substrates to protect metal parts for industrial plants, chemical, fuel, sea water, and biological water tanks active ...
JONES® EPO has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5551:2008
Surface material: Bare steel: To get the best finish, the cleaning with abrasive blast should be conformed to SA 21/2, and the removing oil and grease with solvent should be conformed to SSPC-SP1.
Shopprimed steel: Clean, dry and undamaged approved shopprimer.
For the concrete surfaces, the wet cloths should be used for cleaning dirt and other same contaminants.
The dilute detergent or solvent should be used for removing oil and grease. For exterior surfaces, jet-water can be
used. Filling and leveling the holes and cracks on the surface with suitable materials. The rough surface will increase adhesion. The surface humidity is not more than 12%.
Features
High adhesion on metal, concrete, wood, plastic surfaces. Resistant to acid, salt, gasoline, seawater, fresh water and foods.
View more
JONES® CONC (A)
JONES® CONC is the two-component epoxy primer solidified by Polyamide or Amine. It is used as the primer of coating system for floor in industrial area in order to increase adhesion, resist to alkalization of the finish on concrete surfaces.
Surface material: The practiced surface should be clean. The dilute detergent or solvent should be used to remove oil and grease. For exterior surface, jet-water can be used. Filling and leveling the holes and cracks on the surface with suitable materials. The uneven surface will increase adhesion.
The surface humidity is not more than 4%.
Features
Good adhesion on kinds of floor coating and of concrete surface.
Resistance to water, solvent and chemical.
View more
JONA® WEPO (A)
JONA® WEPO is the water based two-component epoxy. It is used for finishing concrete floor surfaces of house, storage, workshop, plant, factory, laboratory, etc.
Surface material: The practiced surface should be clean and free from the contamination of dirt, oil, wax, chalking, mildew and other chemical agents in order to ensure proper adhesion to the substrate. The jet- water can be used for cleaning after that.
The prior coating (if any) has to be moved by sanded or abraded.
Filling the holes and cracks on the surface and/ or leveling with JOTON® WEPO.
For the new concrete (in normal conditions), practicing is only allowed after 28 days.
Features
Practice and clean tools easily.
Durability and fast color film.
Standing impact, abrasion, chemical and the influences of weather well.
Safety in application because of the used water thinner.
View more
JONA® TAR (A)
JONA® TAR is the two-component epoxy finish with large solid content, curing by polyamide or polyamine Its ingredient has coal tar in order to protect the underground concrete surfaces. It is used for the underwater metal surfaces or surfaces at fluctuated water-line, interior surfaces of ballast holds, waste water cistern. JONES® TAR has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5659:2008.
Surface material: Concrete, metal
Features
Good adhesion.
Stand the impact and abrasion well.
Resistance to fungus and alga.
Good water-resistant.
View more
JONA® LEVEL (A)
JONA®LEVEL is the three-component epoxy coating without solvent. It is self leveling and homogeneous. It could be practiced in different thicknesses. (depend on the surface conditions) It is used for floors of storage, workshop, plant, factory, laboratory etc., in order to protect them against abrasion and chemical influence. It is possible for medium loading on.
Surface material: For new concrete floor, it demands the time of at least 28 days to solidify completely. The concrete has to meet technical requirements such as the mixing ratio of water with cement, used additives, durability requirement of concrete, etc.
The practiced surface humidity is not more than 4%.
The humidity of practiced space is not more than 85%.
The practiced surface should be completely cleaned. Oil, grease and chemical substances should be removed.
Filling and leveling the holes and cracks on the surface (if any). The practiced surface should be leveled well.
The surface preparation is completed on the day before it should be cleaned dirt again by suction before practiced.
The recoating is carried out during the incompletion solidification of previous coating will get the best adhesion. If the recoating time is beyond the recommendation, the surface should be roughened again before recoating.
Features
Standing weight, impact, abrasion and chemical influence well.
The thickness practice from 1-3mm is possible. (depend on practice method)
View more
JONA® INT (A)
JONA® INT is the two-component epoxy with large solid content and is a part of an epoxy coating system. It makes the film harder and tougher with reasonable thickness and stands the impacts well. JONA® INT has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5659:2008.
Surface material: The practiced surface should be clean, dry and free oil, grease and chalking.
Features
Practice easily
Standing impact and abrasion well.
Add the hardness and toughness to the film.
Heat-resistant up to 1100C (un-continuous).
View more
JONA® EPO METALLIC
JONA® EPO METALLIC is a coating for solvent-free concrete floor, Epoxy resin base consists of 2 components, self-spreading, for a seamless finish surface, capable of executing at high thickness.
Used in many fields from industrial floors with light loads and floor types that require long-term protection against chemicals and abrasives such as warehouses, laboratories, factories, industrial plants, diseases institute.
Surface material: Concrete
Features
Bearing, impact resistant, abrasive and very good chemicals. Can be applied at 1-3 mm thickness (depending on construction method).
View more