Surface material: The practiced surface should be clean. The dilute detergent or solvent should be used to remove oil and grease. For exterior surface, jet-water can be used. Filling and leveling the holes and cracks on the surface with suitable materials. The uneven surface will increase adhesion. The surface humidity is not more than 4%.

Features Good adhesion on kinds of floor coating and of concrete surface.    Resistance to water, solvent and chemical.

Surface material: Mental

Features High adhesion. Durable to sea water. High corrosion resistance.

Surface material: The wood

Features Anti mold. Waterproof. Easy to clean, easy to scan.

Surface material: Wood, rattan, bamboo, .....

Features Does not affect the natural color of wood.

Surface material: The practiced surface should be clean and free from the contamination of dirt, oil, wax, chalking, mildew and other chemical agents in order to ensure proper adhesion to the substrate. The jet- water can be used for cleaning after that. The prior coating (if any) has to be moved by sanded or abraded. Filling the holes and cracks on the surface and/ or leveling with JOTON® WEPO. For the new concrete (in normal conditions), practicing is only allowed after 28 days.

Features   Practice and clean tools easily. Durability and fast color film. Standing impact, abrasion, chemical and the influences of weather well. Safety in application because of the used water thinner.

Surface material: Concrete, metal

Features Good adhesion.  Stand the impact and abrasion well. Resistance to fungus and alga. Good water-resistant.

Surface material: The practiced surface should be clear, dry and free from oil and grease.

Features Good adhesion. Resistance to gasoline, oil, water, salt water, sea water and chemical substances. Outstanding resistance against weather. Compatible with JONES® ZINC-S. Heat-resistant up to 3500 C.

Surface material: The practiced surface should be clean, dry and free from oil and grease.

Features Good adhesion and gloss film. Durability, standing impact and abrasion well. Resistance to the influences of weather, UV and chemical. Resistance to acid and alkali, gasoline. Water-resistant. Heat-resistant up to 1000C (un-continuous).

Surface material: The practiced surface should be clear, dry and free from oil and grease.

Features Good adhesion, hard film, durability. Excellent resistance to sea water and sea weather. Standing impact and abrasion well.

Surface material: For new concrete floor, it demands the time of at least 28 days to solidify completely. The concrete has to meet technical requirements such as the mixing ratio of water with cement, used additives, durability requirement of concrete, etc. The practiced surface humidity is not more than 4%. The humidity of practiced space is not more than 85%. The practiced surface should be completely cleaned. Oil, grease and chemical substances should be removed. Filling and leveling the holes and cracks on the surface (if any). The practiced surface should be leveled well. The surface preparation is completed on the day before it should be cleaned dirt again by suction before practiced. The recoating is carried out during the incompletion solidification of previous coating will get the best adhesion. If the recoating time is beyond the recommendation, the surface should be roughened again before recoating.

Features Standing weight, impact, abrasion and chemical influence well. The thickness practice from 1-3mm is possible. (depend on practice method)

Surface material: The practiced surface should be clean, dry and free oil, grease and chalking.

Features Practice easily Standing impact and abrasion well. Add the hardness and toughness to the film. Heat-resistant up to 1100C (un-continuous).

Surface material: Wood, concrete, wood imitation materials, ...

Features High adhesion, translucency. Hard, tough paint film. Good water resistance. Color fastness, weather resistance, ultraviolet rays.