JOTON | Sự khác biệt đến bất ngờ !

Industrial

other products

JOTON® REGAL 2K

JOTON REGAL 2K is the two-component polyurethane finish solidified by Polyisocyanate. It is produced from Acrylic resin and used for metal surfaces without primer layer, especially on metals which are hard–to-apply, such as: aluminum, galvanized steel, inox Suitable for both interior and exterior in industry, construction, transportation, and other industries. JOTON REGAL 2K has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K5659:2018.

Surface material: aluminum, galvanized steel, inox...

Features  Good adhesion and gloss film.  Durability, standing impact and abrasion well.  Resistance to the influences of weather, UV and chemical.  Resistance to acid and alkali, gasoline.  Water-resistant.  Heat-resistant up to 100oC (un-continuous).

JOTO® LOG

JOTO®LOG is the fast drying based alkyd modified synthesis copolymer primer coating. It is used as the primer of the steel, wood surfaces, anti-fouling coating to rust-proof the surfaces of bilge.

Surface material: The practiced surface should be clear, dry and free from oil, grease and other contaminants. Bare steel: To get the best finish, the cleaning with abrasive blast should be conformed to SA 21/2, and the removing oil and grease with solvent should be conformed to SSPC-SP1. For wood surface, the holes and cracks on the surface should be filled and leveled with suitable materials.

Features High adhesion. Durable to sea water. Quick dry.

JOTO® 6

JOTO® 6 is the Colophony and Synthesis based anti-fouling coating with Biocide and Cuprous Oxide. Its operating is on solution reaction. It is used for protecting the bilge and underwater parts of boat for anti fouling from 6 to 9 months (Depending on operating conditions of boat).

Surface material: The surface must be dry and free from fouling, salts and other contaminants. Remove salts and dirt by fresh water washing and hard fouling by scraping. For steel surface: the rust should be cleaned and the blisters of prior coating should be leveled. Corroded and/ or damaged areas should be repaired first with an appropriate primer system. For wood surface, the holes and cracks on the surface should be filled and leveled with suitable materials.

Features Good adhesion. Fast drying. Resistance to seaweed and fouling.

JONES® ZINC-S

JONES® ZINC-S is the two-component Zinc Ethyl Silicate primer with property of self-solidification, anti–abrasion and standing well hard weather conditions. Its film appearance is level and matte. It protects steel surfaces such as tanks or hold of chemical, chimney, etc. which have been borne high heat. JONES® ZINC-S is also suitable for another coatings such as Epoxy, Silicone, Polyurethane, etc. JONES® ZINC-S has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5553:2010.

Surface material: Metal

Features High adhesion. Durable with salt water, gasoline, sea water, fresh water and chemicals in the range of pH 5-9.

JONES® ZINC-R

JONES® ZINC-R is the two-component epoxy primer with Zinc dust solidified by Polyamide. It is anti-corrosive and anti-abrasion of steel surfaces that have been demanded an epoxy coating system. JONES® ZINC-R has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5553:2010.

Features High adhesion. Durable with salt water, gasoline, sea water, fresh water, chemicals

JONES® ZINC-P

JONES® ZINC-P is the two-component epoxy primer with Zinc Phosphate. It is used for resisting corrosion of metal surfaces in irrigation, marine works and chemical workshop that have been demanded an epoxy coating system. JONES® ZINC - P has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5551:2008.

Features Good adhesion. Resistance to gasoline, oil, water, sea water. Resistant to chemical substances and the influences of weather. Heat-resistant up to 1100C (un-continuous).

JONES® ETCH

JONES® ETCH is a two-component acid primer based on polyvinyl butyral resin, used to increase the adhesion of coatings on metal surfaces, especially difficult metals such as aluminum, steel and steel. JONES® ETCH galvanized is compatible with many types of coatings: alkyd, epoxy, PU, ...

Surface material: Metal, especially aluminum, steel and galvanized steel.

Features High solid content, abrasion resistance, impact. This product is part of a complete Epoxy coating system, has a high surface hardness and is suitable for systems with a thick thick raft ... Meets JIS K 5659: 2008.

JONES® EPO CLEAR

Surface material:

Features

JONES® EPO

JONES® EPO is the two-component epoxy primer solidified by Polyamide or Amine. It is compatible with most of another Chlorinated rubber, Polyurethane and Epoxy. Used to increase adhesion, alkali prevention effect for coatings on concrete and anti-rust substrates to protect metal parts for industrial plants, chemical, fuel, sea water, and biological water tanks active ... JONES® EPO has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5551:2008

Surface material: Bare steel: To get the best finish, the cleaning with abrasive blast should be conformed to SA 21/2, and the removing oil and grease with solvent should be conformed to SSPC-SP1. Shopprimed steel: Clean, dry and undamaged approved shopprimer. For the concrete surfaces, the wet cloths should be used for cleaning dirt and other same contaminants. The dilute detergent or solvent should be used for removing oil and grease. For exterior surfaces, jet-water can be used. Filling and leveling the holes and cracks on the surface with suitable materials. The rough surface will increase adhesion. The surface humidity is not more than 12%.

Features High adhesion on metal, concrete, wood, plastic surfaces. Resistant to acid, salt, gasoline, seawater, fresh water and foods.

JONES® AC

JONES® AC is the high quality anti-corrosive primer coating with Aluminum. It is used as the anti-corrosive primer of the boat steel surfaces which are underwater, at unstable water-line, bilge, deck, drying parts and of other construction steel surfaces. JONES® AC has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD - JIS K 5639:2002.

Surface material: Mental

Features High adhesion. Durable to sea water. High corrosion resistance.

JONA® TAR (A)

JONA® TAR is the two-component epoxy finish with large solid content, curing by polyamide or polyamine Its ingredient has coal tar in order to protect the underground concrete surfaces. It is used for the underwater metal surfaces or surfaces at fluctuated water-line, interior surfaces of ballast holds, waste water cistern. JONES® TAR has been certified as conforming to the JAPANESE INDUSTRIAL STANDARD JIS K 5659:2008.

Surface material: Concrete, metal

Features Good adhesion. Stand the impact and abrasion well. Resistance to fungus and alga. Good water-resistant.

JONA® SICO-300

JONA® SICO-300 is the heatproof paint, based on silicone resin. It is used for coating objects which have been resisted heat up to 350o C.

Surface material: The practiced surface should be clear, dry and free from oil and grease.

Features Good adhesion. Resistance to gasoline, oil, water, salt water, sea water and chemical substances. Outstanding resistance against weather. Compatible with JONES® ZINC-S. Heat-resistant up to 3500 C.